The future doesn't exist!

BGA Rework Stations the worst practice ever

BGA Rework Stations is the first and one of the actual professional websites on the internet.

On BGA Rework Stations.com (this website), I’ll count you, from 35+ years of experience in electronic service fields, reverse engineering point of view, and from my 10+ years of research, to buy a real professional BGA Rework Station. I don’t found one. Instead, I found that professional BGA Rework Stations don’t exist. What I’ll found was only popcorn, pizza machines, or Santa Claus cousin that “well-known, professional, Chinese manufacturers” sell us as “Professional BGA Rework Stations.” The future doesn’t exist. The actual professional BGA Rework Station is not invented… Yet…

“If the future doesn’t exist, I’ll invent it.” I do not pretend that I’m best or worse than others; what I’ll pretend is the fact that I express my opinions from a scientific-technological point of view. Common sense says that this is the right way. If you are a guy that thinks that for you, do not exist more mysteries in electronics, this website is not for you. For the other electronics professionals, you are welcome to take a look and read all information with patience and attention. In the end, please bring your conclusions.

You are an electronic service shop, a hardware developer, a component manufacturer, an electronics device warranty representative, aviation electronics, space electronics, boat electronics, F1 cars electronics… You name it what you are; you need one or more Real Professional BGA Rework Stations. It is a must. You search all over the internet and see… A considerable amount of “Professional BGA Rework Stations.” Prices are $200 to $120,000 for ERSA HR-600 XL garbage; I think that exists some Chinese junk in this price range… All “well-known” “professional manufacturers” claim they will sell you Professional BGA Rework Stations. But… this is a simple and false affirmation! Any affirmation needs to be demonstrated/proved. Well… No proves. 

On this website, I’ll dismount all those affirmations based on pseudo things you’ll see all over the internet.

Manufacturer
I search for
PDR-Rework
KURTZ-ERSA
PACE
Finetech
Martin
Zephyrtronics
ATCO-US
APR-Scorpion
AIR-VAC
Shuttle-Star (China)
Image
best practice
PDR-Rework review
ERSA HR600 XL
Pace-IR4100
Finetech coreplus
Martin-expert-106
BGA-Prototype-Work
ATCO-at-gdp-1
APR Scorpion XL
AIR-VAC-DRS27T6Z
Shuttle Star RW-SV2000A
Price Range
Fair price for technology
$8,548 – $47,807*
$12,000 – $110,000
$47,000 – $62,726
$40,000 – $87,000*
$30,000 – $60,000*
$3,995 – $8,240
Around $46,000*
$28,000 – $57,000
Around $50,000
$200 – $120,000
Number of Models
5
7
9
4
2
6
6
3
6
5
>100
Manufacturer Country
United States of America / Europe
United Kingdom
Germany
Germany
United States of America
Germany
United States of America
United States of America
United States of America
United States of America
China / India / South Korea
Power Supply
EU – 230V / US – 120V
EU – 230V
EU – 230V / EU – 400V
EU – 230V / US – 120V
EU – 230V *
EU – 230V *
US – 120V *
EU – 230V *
EU – 230V *
US – 120V *
Many
Consumed power
2000W – 3000W
2000W – 3000W
1200W – 31,000W
1300W – 2400W
2500W
5300W
About 2000W*
3500W – 3900W
2800W
4500W – 15,000W
Up to 64,000W
PCB maximum size
50″ / 1250 mm
24″ / 620 mm
50″ / 1250 mm
24″ / 610 mm
16″ / 400 mm
**
20″ / 520 mm
20″ / 508 mm
13.5″ 343 mm – open
32″ / 800 mm
40″ / 1000 mm
Bottom Heating Zones
UHU – Ultra High Uniformity
9
64
Many
1 or 2***
Many
1 or 2 ***
3
3
1
Copy / paste all Zones!!!
Bottom Technology
Tungsten – NIR / SWIR
Quartz / MWIR / LWIR
Ceramics / LWIR
Quartz / MWIR / LWIR
Hot air / nitrogen?!
Quartz / MWIR / LWIR
Hot air / nitrogen?!
Quartz / MWIR / LWIR / Hot air / nitrogen?!
Hot air / nitrogen
Metallic hot plate / LWIR???
Copy / paste all!!!
Bottom pseudo technology
Direct Electromagnetic Energy Transfer
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
BGA / chip max. size
3.2″ / 80 mm
2.2″ / 55 mm
2.4″ / 60 mm
2.5″ / 65 mm
2.4″ / 60 mm
***
***
2.25 / 57 mm
2.24″ / 57 mm
3″ / 75 mm
Many
Top heater technology
NIR / SWIR – LASER
NIR / SWIR / MWIR
Hybrid / Hot air – Nitrogen / LWIR / MWIR
Hot air / LWIR / MWIR
Hot air / nitrogen
Hot air / nitrogen???
Hot air
Hot air / nitrogen
Hot air / nitrogen
Hot air
Copy / paste all!!!
Top heater pseudo technology
Direct Electromagnetic Energy Transfer
Direct energy transfer
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature direct convection heating
Temperature NIST calibration
YES
No
No
No
No
No
No
No
No
No
No
NIST traceable certificate
YES
No
No
No
No
No
No
No
No
No
No
Chip positioning
SSCPS / Beam Combiner / Pick & Place
“Beam-splitter”
“Beam-splitter” / Pick and place
“Beam-splitter”
“Beam-splitter”
“Beam-splitter”
“Beam-splitter”
“Beam-splitter”
“Beam-splitter”
“Beam-splitter”
“Beam-splitter”
Process view camera
Close View CUPVC
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No / Yes
PCB fixture
UCAFPCB
Wrong – elastic
Fixed / rigid
Fixed / rigid
Fixed / rigid
Wrong – magnetic
Fixed / rigid
Fixed / rigid
Fixed / rigid
Fixed / rigid
Fixed / rigid
Own vacuum
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No / Yes
Positioning accuracy
Adaptive AHPPS
Inutile μm fight****
Inutile μm fight****
Inutile μm fight****
Inutile μm fight****
Inutile μm fight****
Inutile μm fight****
Inutile μm fight****
Inutile μm fight****
Inutile μm fight****
Inutile μm fight****
PCB cooling
Two Zone TBPCS
“Air Knife”
No
No
No
No
No
No
No
No
No / Yes

A Real Professional BGA Rework Stations is a MUST-have and MUST-have best practice, science, technology, and common sense.

placeholder

All “well-known” “professional manufacturers” claim that their garbage uses the best technologies, best practices, and the highest accuracy, science, warranty, and support, yield 99%, best practice, the best approach, and so on. They have/use pseudoscience, pseudo-technology, promiscuity, lies, unfulfilled promise, and more… As for their behavior to make affirmations, I’ll make the above protestations but unlike them… I will demonstrate/argue/prove all my affirmations on this website about BGA Rework Stations and more. 

I have two sites, bga-rework-station.com, and bga-rework-stations.com. If you pay attention, you will see they are not the same websites! First (bga-rework-station.com it is singular…) and second (bga-rework-stations.com – it is plural). I’ll start a free-to-use information campaign on those two websites for you. Why did I do that?! Simply… More than ten years ago, I’ll search to buy Real Professional BGA Rework Stations. After a superficial (many months…) search, I think I’ll find one… $50,000 – a PDR Rework garbage. After over ten years, I look behind, and I’ll see that when I want to buy that garbage… I was an… IGNORANT

But that ignorance wasn’t my fault; it was due to the lack of information on the internet! Without accessible/clear/accurate information, I’ll tend to believe all aberrations that all “well-known” “professional manufacturers” claim about BGA Rework Stations.

At that time, I didn’t buy my “dreamed” BGA Rework Stations due to a simple… fact. I don’t have enough money at that moment, meantime while collecting enough money; I’ll start my research about BGA Rework Stations from a scientific/technological point of view. This saved my pockets at that time, but… years later… destroyed my packets. From my math, more than 100,000 pcs of garbage currently exist on the market. Exist more than 100,000 guys that kill BGAs / PCBs worldwide. Equally, what they say (perfect rework, control, advice, and so on)… That garbage can’t be controlled. It can’t be accurate. All this because the science behind says that about what the name… BGA Rework Stations.

placeholder

The internet become a jungle where you have the real possibility of losing two most important things… Time and money. So many gurus (with only bullshit in what they say…) are on the internet that you are tempted to believe them. Many are crying on various “professional” (nothing professional) forums and catch the wisest ever advice from guys who know nothing about electronics. They’re speaking about all, including the BGA Rework Stations subject. Please remember some facts – you can unmount and mount a BGA Chip with many devices, cooktop machines, pizza machines, popcorn machines, barbecue machines, DIY things, Santa Claus cousin, you name it.

With all that tools, you can unmount and mount a BGA chip uncontrolled, the same manner as actual “Professional BGA Rework Stations from well-known, professional Chinese manufacturers.”

If you have some luck… it is possible that all will work on the fly. Does that mean that all that improper machines are Professional BGA Rework Stations?! NoThe electronic is a science; it is an exact science. A BGA Rework Station is a tool that MUST have the science at its base and reply scientifically to the Rework process. The rest are… garbageElectronic science doesn’t work with luck. 

Now, when I’ll write these reviews and try to organize them, I’ll see that all (three reviews now) have in common one error, the biggest ever error in the world; that makes possible the fact that for more than 35 years, it has been possible that all garbage that is named BGA Rework Stations can be sold/bought, all over the world. Heating a PCB / board is the primary and most important approach in BGA Rework Process / selective soldering. You’ll heat the PCB / board as the first parameter / best practice / must-known to achieve 100% repetitiveness / 100% yield. It is unbelievable that the world doesn’t know how to heat a PCB / board.

 
placeholder

The unusual situation is not that the users of “well-known manufacturers” BGA Rework Stations don’t know how to heat a PCB / board. The significant problem is that all “well-known manufacturers” themselves, even they don’t hear about Tg – the point. What a shame, what a shame for an entire industry. Promoting tools that destroy PCB / boards is the worst, most shameful situation for all self-named. “Well-known manufacturers.” You, who brought this garbage from today’s market, have blindly trusted their affirmations. That was a colossal error. This is the dark side of an entire industry.

I can understand that all world manufacturers, with the marketing/publicity, manipulate the consumers/clients with some true affirmations and small gaps… But I can’t understand how an entire world’s professional industry can be used only with lies, cheats, worst practice recommendations, and false/fake affirmations about BGA Rework Stations. I can’t believe that professionals in the most qualified science in the world, the science that put a man on the Moon, the science that give the PC, iPhone, and the electronics sciences, can be fooled by some amputated brain ignorant’s thefts. It is unbelievable.

Self-nominated – “Well-known manufacturers,” almost all with IPC certificates, the “IPC Certificates” = a pyramidal game, are made only for money-hungry persons with nothing to do with the electronics industries/electronics sciences. They only sell fumes/dreams/illusions. They can’t teach you… anything to you, truly /  real /  professionals in electronics sciences, in the electronics industry. You have your study diploma/certificate; you have many years of experience. Can’t come in front of you some salesmen’s to teach you soldering… Let’s be serious, people! They are only cheating you. A salesperson will teach you about BGA Rework Stations?!. Salespeople can’t teach you anything!

What they sell as "Real Professional BGA Rework Stations" have nothing to do with best practice, science, technology, or common sense. They all have pseudo-sciences, pseudo-technologies, lies, cheats, and promiscuity... All that with the world's most significant, worst lack of common sense.

Thank you and, please… Click here to go to the next (from a logical point of view, after this page). After that, you’ll read the second page; you can use the menu or the links from texts to navigate around this website. Please read with attention all information from BGA Rework Stations, this website, and another sister website –  BGA Rework Station. You can buy authentic professional BGA Rework Station (when the projects will be products) on i-esn.com.